Modulo mando a distancia RF Puerta GARAGE (12VDC) - 5 mandos

Módulo es para apertura y cierre de puertas de garaje.
Los mando se comunican con el receptor por RF.
El receptor se puede conectar al WIFI del local o vivienda y automatizarlo con ALEXA o GOOGLE, para utilizarlo por voz o por las APP

Carastersiticas:

• Input voltage：DC/AC 7V~32V AC85-250V
• Radio Frequency:433Mhz 433.92MHz
• Codes: Working with any fixed and rolling code remote control
• Working temperature: -20℃~70℃
• Programming: press and hold the learn button on the receiver few seconds.
• Then hold and press the remote control button to programming.
• Delete code: Press and hold the delete code about 20 seconds.
• Checklist before using the device
• Your smart phone or tablet has connected to a2.4g WiFi with internet.
• You need to enable Bluetooth of the phone.You have the correct WiFi PWD.
• You have the correct WiFi PWD.
• You smart phone or tablet must have access to APPstore,Google play.
• Your router is MAC-open

Checklist before using the device

• Your smart phone or tablet has connected to a2.4g WiFi with internet.
• You need to enable Bluetooth of the phone.You have the correct WiFi PWD.
• You have the correct WiFi PWD.
• You smart phone or tablet must have access to APPstore,Google play.
• Your router is MAC-open

433mhz Transmitter PROGRAMMING:

• 1.Learning transmitter’s codes:
  • Press “learn 1” or “learn 2” for 2 second, the “learn_led” light, then, press the button which you choose on the transmitter till the “learn_led” flash and go out, the transmitter’s code has been stored.
  • Repeat the above steps for other transmitters.
• 2.Erasing transmitter’s codes:
  • Press “learn 1” or “learn2” and hold on to make the “learn_led light till go out, all codes of transmitters which had been stored are erased.